How to set up water pumps in Once Human

How to set up water pumps in Once Human

Direct links

In Once human, Water is a necessary resource not only for survival, but also for growing crops, cooking, and crafting. Obtaining water by hand is a long and tedious process, but luckily there are water pumps in the game that can do all of this for you.




Setting up water pumps is a bit confusing at first. However, if you have a passive acid farm in Once human, or if you simply don’t want to deal with the hassle of constantly having to siphon water, then learning how pumps work should be at the top of your priority list.

Related

Once Human: Best Mods for Shrapnel

There are a number of mods in Once Human that players aiming for a Shrapnel build may want to try out and loot, and here’s what to choose.

A water pump gets dirty water in Once Human

Since there are two buildable objects called Water Pumps in the game, this guide refers to the pumps that collect water as Water pump (extractor)and those that transfer water from one object to another are called Wall pumps.


Normally used to collect water in Once humanyou have to manually collect water from rivers, lakes or the sea. If you build a water pump (extractor) over soil or sandit is collected automatically Dirty water for you once you connect it to a power source. However, you will need to clean the dirty water by boiling it on a stove or connecting a pipe between the extractor and a water purifier.

To automate water treatment, proceed as follows:

  1. Enter build mode.
  2. Approach your water pump (extractor).
  3. Press V to start connecting the water pipes.
  4. Go to your water purifier and then press V again.

By default, water in pipes flows according to gravity, so make sure your extractor is higher than your purifier.

Related

Once Human: How to get the Atomic Lighter Deviant

A Nuclear Lighter in Once Human is great if you’re looking for a source of cheap and effective explosives. Here’s where to get this Deviant.

How to extract oil and contaminated water

The type of liquid you get from a water pump (extractor) depends on where you place it. If you place it over a piece of black soil in the Blackheart or Red Sands regionsyou get crude oil. If you place it over soil or sand in an area polluted with stardustyou get polluted water.


A good place to get polluted water is the Refinery Pollution Point in Once humanwhich is located south of Greywater Camp in the Iron River region. You’ll know if the ground you’re standing on is dirty when your pack starts ticking.

How to set up water pumps in Once Human

If you want to Transport water from an extractor or water tank to a distant purifier or another similar production/storage facility, You must use wall pumpsEssentially These devices reverse the water flowso you can place the extractors at a lower height and still allow liquid to flow into the desired containers.

You can tell which direction water is flowing by watching for the white flashing light that moves from one end of a water pipe to the other.


To use these small water pumps, place one of them on a wall and then connect your main extractor to it. From the wall pump, connect another pipe to your desired destination, be it a storage tank or a purifier. Also, make sure to connect the wall pump to a power source, such as Once human Hydraulic generators or other systems that are already supplied with electricity.

Leave a Reply

Your email address will not be published. Required fields are marked *